Canon 700 Series Manuale Utente

Redialing When the Line Is Busy

Sending Documents

If the other party’s line is busy or there is no answer, the machine waits two 
minutes, then tries to dial the same number again. This feature is called “Automatic 
Redialing.”

After the initial dialing attempt, the machine waits two minutes, and tries to dial 
again. If the second attempt fails, the machine waits for two more minutes, and 
makes a third and final attempt to complete the call.

Auto Redial can be turned ‘ON’ and ‘OFF’. To perform this procedure, see “Setting 
Up Redialing,” on p. 3-23.

The number of redialing attempts and the time interval between attempts can also 
be set with the Auto Redial feature.

■ Messages Displayed When Redialing

While the machine is waiting to redial when using Direct TX, the following message is 
displayed:

If all redialing attempts fail, the machine cancels the transaction, displays the following 
message, and prints an Error TX report to remind you that the transmission did not 
complete.

NOTE
• To cancel redialing, if you are using Direct Sending, press 

 (Stop). If you are using 

Memory Sending, press [Delete File].

• To erase the document from memory, press [Delete File]. (See “Erasing a Document 

• Even if the machine is set to redial several times, it redials only once if there is no dial 

tone or ring back tone during the first attempt.