ZyXEL Communications IES-612-51A Manuale Utente
Chapter 52 ADSL Commands
IES-612-51A User’s Guide
353
This command displays or sets masks for downstream carrier tones from 256 to 511 on the
specified ADSL2+ port(s). Use this command to have the system not use a DSL line’s tones
that are known to have a high noise level.
specified ADSL2+ port(s). Use this command to have the system not use a DSL line’s tones
that are known to have a high noise level.
The following example disables downstream carrier tone 307 for ADSL2+ port 5.
The following example disables downstream carrier tones 304 to 307 for ADSL2+ port 5.
The following example displays the results.
52.1.16 PMM Parameters Command
Syntax:
ras> adsl pmm param <portlist> [<l0time> <l2time> <l2atpr> <l2atprt>]
[<max_l2rate> <min_l2rate> <l0tol2_rate>]
where
Figure 230 DSL Port Downstream Carrier1 Command Example 1
ras> adsl dscarrier1 5 0 00001000 0 0 0 0 0 0
Figure 231 DSL Port Downstream Carrier1 Command Example 2
ras> adsl dscarrier1 5 0 0000f000 0 0 0 0 0 0
Figure 232 DSL Port Downstream Carrier1 Command Display Example
ras> adsl dscarrier1 5
ds carrier
port m0 m1 m2 m3 m4 m5 m6 m7
---- |--------|--------|--------|--------|--------|--------|--------|-----
---|
5 00000000 000F0000 00000000 00000000 00000000 00000000 00000000
00000000
Tone:
m0:256-287, m1:288-319, m2:320-351, m3:352-383
m4:384-415, m5:416-447, m6:448-479, m7:480-511
<portlist>
=
You can specify a single DSL port <1>, all DSL ports <*>
or a list of DSL ports <1,3,5>. You can also include a range
of ports <1,5,6~10>.
or a list of DSL ports <1,3,5>. You can also include a range
of ports <1,5,6~10>.
<l0time>
=
Set the minimum time in seconds (10~65535) that the DSL
line must stay in L0 power mode before changing to the L2
power mode.
line must stay in L0 power mode before changing to the L2
power mode.
<l2time>
=
Set minimum time in seconds (10~65535) that the DSL line
must stay in the L2 power mode before reducing the power
again in the L2 power mode.
must stay in the L2 power mode before reducing the power
again in the L2 power mode.