HP (Hewlett-Packard) hp OpenView storage management appliance software Manuale Utente

Pagina di 80
HP StorageWorks SAN and Brocade Switch Event Codes
13
Storage Management Appliance Software Event Code Definitions Application Notes
HP StorageWorks SAN and Brocade Switch Event Codes
The following events are generated by HP StorageWorks SAN switches and Brocade switches 
and are recorded in the Storage Management Appliance Event Log. Many of these event types 
have several possible states and each state has an appropriate severity code. 
The Storage Management Appliance supports the StorageWorks SAN and Brocade MIB 
version 4.0.
Table 6:  StorageWorks SAN and Brocade Switch Event Codes
Event 
ID
Event 
Code
Possible States
Severity
Description
105
88020069
unknown
online
offline
testing
faulty
0
2
5
2
7
Port Index %2 changed state to %1%n 
SSN: %3%n
GroupName: %3%n
GroupType: %5%n
Group MemPosition: %6%n
A swFCPortScn(3) is generated whenever 
an FC_Port changes its operational state. 
For instance, the FC_Port goes from on-line 
to offline. The VarBind in the Trap Data Unit 
shall contain the corresponding instance of 
the FC_Port's operational status and index.
101
88020065
ok
faulty
unknown
2
5
0
Switch is faulty.
Faulty reason: %1%n
SSN: %2%n
GroupName: %3%n
GroupType: %4%n
Group MemPosition: %5%n
A swFault(1) is generated whenever the 
diagnostics detects a fault with the switch.
103
88020067
unknown
faulty
below minimum
normal
above maximum
absent
0
5
7
2
5
2
%5 is currently in state %1%n
SSN: %7%n
GroupName: %3%n
GroupType: %8%n
Group MemPosition: %9%n
A swSensorScn(2) is generated whenever 
an environment sensor changes its 
operational state. For instance, a fan stops 
working. The VarBind in the Trap Data Unit 
shall contain the corresponding instance of 
the sensor status, sensor index, sensor type, 
sensor value (reading) and sensor 
information. Note that the sensor 
information contains the type of sensor and 
its number in textual format.
107
8802006B
critical
error
warning
informational
debug
5
5
3
2
2
Event %1: %2 (severity level %3) - %5%n
SSN: %6%n
GroupName: %7%n
GroupType: %8%n
GroupMemPosition: %9%n
This trap is generated when an event whose 
level at or below swEventTrapLevel occurs.