Yamaha RX-SL80 Manuale Utente

■

The name of the selected program appears in the front 
panel display.

■

The name of the selected program appears in the front 
panel display.

y

Choose a sound field program based on your listening preference, 
and not on the name of the program.

• If no operation is performed within 5 seconds of pressing DSP 

on the front panel, the function of VOLUME/SELECT switches 
back to volume.

• After selecting a DSP program, press VOLUME/SELECT to 

switch the function of VOLUME/SELECT back to “volume”.

• There are 9 programs with sub-programs available with this 

unit. However, the selection depends on the input signal format 
and not all sub-programs can be used with all input signal 
formats.

• The acoustics of your listening room affect the sound field 

program. Minimize the sound reflections in your room to 
maximize the effect created by the program.

• When you select an input source, this unit automatically selects 

the last sound field program used with that source.

• When you set this unit in standby mode, it stores the current 

source and sound field program in memory and automatically 
selects them when you turn on the power again.

• If the unit receives a Dolby Digital or DTS signal when the 

input mode is set to AUTO, the CINEMA DSP sound field 
programs automatically switches to the appropriate decoding 
program.

• When the unit is reproducing a monaural source with PRO 

LOGIC, PRO LOGIC Enhanced, PRO LOGIC II Game or PRO 
LOGIC II Movie, no sound is output from the front and 
surround speakers. Sound can only be heard from the center 
speaker. (If CENTER SP in SPEAKER SET in the SOUND 
menu is set to “None”, the center channel sound is output from 
the front speakers.)

• Sampling frequencies higher than 48 kHz (except for DTS 96/

24 signals) will be sampled down to 48 kHz, then sound field 
programs will be applied.

s

w

e

f

b

–

+

p

d

a

u

b

–

+

p

a

–

+