Yamaha RX-SL80 Manuale Utente

Once you set the appropriate remote control codes, you 
can use this remote to control your other components. 
Note that some buttons may not correctly operate the 
selected component. Use the input selector buttons to 
select the component you want to operate. The remote 
control automatically switches to the appropriate control 
mode for that component.

■

The following table shows the default component 
(Library: component category) and the remote control 
code for each area.

You may not be able to operate your YAMAHA component even 
if a YAMAHA remote control code is initially set as listed above. 
In this case, try to set another YAMAHA remote control code.

■

Refer to “LIST OF REMOTE CONTROL CODES” at the 
end of this manual.

y

To reset an input area’s remote control code to the factory default, 
input the default code (see “Default codes” above) in step 3.

• If the manufacturer of your component has more than one code, 

try each of them until you find the correct one.

• If you wait for more than 10 seconds during step 3, the setup 

process is canceled. If this happens, start over from step 2.

• Replace the batteries frequently. The settings may be lost after 

two minutes without power supply.

• If the remote control code is successfully set, “Code Set OK” 

appears in the front panel display of this unit. If the setting is 
not successful, “Code Set NG” appears.

TV (DTV/CBL)

YAMAHA

299

VCR

YAMAHA

399

DVD (DVD/CD)

YAMAHA

699