Toshiba WT8-A Series Manuale Utente
Do not use utilities, including those intended to enhance internal
storage access speed. They may cause unstable operation and
damage data.
Do not shut down/log off or Sleep/Hibernate while writing or rewriting
the drive.
Set the computer on a level surface and avoid places subjected to
vibrations such as airplanes, trains, or cars.
Do not use on an unstable surface such as a stand.
storage access speed. They may cause unstable operation and
damage data.
Do not shut down/log off or Sleep/Hibernate while writing or rewriting
the drive.
Set the computer on a level surface and avoid places subjected to
vibrations such as airplanes, trains, or cars.
Do not use on an unstable surface such as a stand.
A recovery image of the software on your tablet is stored on a dedicated
recovery partition on your tablet, and can be copied to a USB Flash
Memory by the following steps:
recovery partition on your tablet, and can be copied to a USB Flash
Memory by the following steps:
To connect a USB Flash Memory to the Micro-USB port, you must
purchase a suitable Micro USB to USB Converter Cable.
USB Flash Memory will be formatted and all the data in the USB Flash
Memory will be lost when proceeding.
purchase a suitable Micro USB to USB Converter Cable.
USB Flash Memory will be formatted and all the data in the USB Flash
Memory will be lost when proceeding.
1.
Turn on your tablet and allow it to load the Windows operating system
as normal.
as normal.
2.
Insert the USB Flash Memory into Micro-USB port on your tablet by
using the Micro USB to USB Converter Cable.
using the Micro USB to USB Converter Cable.
3.
Tap Control Panel under Windows System in Apps view.
4.
Tap System and Security -> Action Center -> Recovery -> Create
a recovery drive.
a recovery drive.
5.
Follow the on-screen instructions to finish creating the Recovery
Media.
Media.
Restoring the pre-installed software from your created
Recovery Media
If the pre-installed files are damaged, you are able to use the Recovery
Media you have created to restore the computer to the state it was in when
you originally received it. To perform this restoration, follow the steps
below:
Media you have created to restore the computer to the state it was in when
you originally received it. To perform this restoration, follow the steps
below:
When you reinstall the Windows operating system, the storage space may
be reformatted and all data may be lost.
be reformatted and all data may be lost.
1.
Insert the USB Flash Memory into Micro-USB port on your tablet by
using the Micro USB to USB Converter Cable.
using the Micro USB to USB Converter Cable.
2.
In the Settings charm, tap Power and then select Shut down.
3.
After completely shut down the tablet, wait for about 10 seconds. Then
hold down the Power button and Volume up button simultaneously
until the Boot menu is loaded.
hold down the Power button and Volume up button simultaneously
until the Boot menu is loaded.
User's Manual
5-4