SVAT Electronics CLEARVU11 Manuale Utente
SVAT ELECTRONICS
now you can see
CLEARVU11
28
MAIN MENU
• Normal – normal record mode, including, A/V (Audio/Video), V (Video only), or No (No Video). Press +/-
buttons to change the value.
The general operations are as below:
•
▲▼◄►- Press these buttons to select the items. The display will scroll left/right if the selected item is
not shown on the screen.
• COPY ( ) - Press this button to copy the settings of the focus weekday to all the following weekdays.
(E.g. focus weekday is TUE, its settings will be copied to those of weekdays WED-SAT.)
• ESC (MENU/ESC) - Press this button to escape from this screen, and return to Setup Menu display. If the
Save dialog is shown, press ENTER to exit and save, ESC (MENU/ESC) to exit without saving.
HDD SETUP
In Setup Menu display, press
▲▼ to change the highlighted
option to HDD, and then press
ENTER to call up HDD Setup as
shown.
The Clearvu11 has a unique function that allows you to adjust the DVR to partition your hard drive to store a certain
amount of normal recording and a certain amount of alarm recording. In the surveillance applications, alarm video/
audio can be much more important than normal video/audio. So, this digital video/audio recorder is designed to
allow the user to divide each HDD into alarm partition and normal partition. Alarm video/audio will be recorded in
alarm partition, normal video/audio in normal partition. This will prevent the hard drive from filling up with normal
recording and tape over the important alarm recordings.
The HDD Setup allows the administrator to format/clear each HDD, set Alarm Record size and Normal Record size of
each HDD, and define the behaviors for Alarm Record and Normal Record if it reaches the end of the last HDD in the
system.