DMP Electronics LT-0229 (5 97) Manuale Utente

Page 2

2841 E. Industrial Drive  Springfield, MO  65802-6310  800-641-4282

Before installing the XR10/XR20, we recommend you read through the entire contents of this guide. Familiarize
yourself with the features of the panel and the key points to remember during the installation. Be sure to read
and understand all of the caution statements printed in bold italics.

In addition to this installation guide, you should also read through and familiarize yourself with these other
product documents:

• XR10 Programming Guide  (LT-0230)

• XR20 Programming Guide  (LT-0305)

• XR10 Security Command User's Guide  (LT-0226)

• XR20 Security Command User's Guide  (LT-0303)

• XR10 Program Information Sheet  (LT-0212)

• XR20 Program Information Sheet  (LT-0302)

The information contained in this guide is organized into three sections: Table of Contents, Introduction, and
Installation.

• The Table of Contents at the front of this guide lists all of the headings and subheadings used throughout

each section. To the right of each heading is the section number where the information can be found.

• The Introduction section gives you an overview of the various components that go into a XR10/XR20

system and diagrams some typical system configurations. This section gives descriptions of the panel,
keypads, and accessory modules and provides details on how each of them operate together in the
system.

• The Installation section begins with mounting instructions for the enclosure and takes you through the

proper way to power up the panel prior to programming.

Throughout this guide you'll see caution notes containing information you need to know when installing the
XR10/XR20 panel. These cautions are written with a bold, italicized introductory clause followed by a detailed
description of the caution. See the example shown below:

Always ground the panel before applying power to any devices: The XR10/XR20 must be properly
grounded before connecting any devices or applying power to the panel. Proper grounding protects against
Electrostatic Discharge (ESD) that can damage system components.

Whenever you see a caution note, make sure you completely read and understand its information. Failing to
follow the caution note can cause damage to the equipment or improper operation of one or more components in
the system.

To locate information about the installation of the XR10/XR20, first go to the Table of Contents at the front of this
guide. Find the subject heading that closely describes the information you need and turn to the section number
shown to the right of the heading.

The text that follows the heading has been written to provide as much information about the subject as possible.
If you can't find the information you need under that heading, try scanning through a few of the headings before
and after and reading the text under those that sound similar.