Fujifilm FinePix30i Manuale Utente

This mode can be selected in the “

2

” still

image mode.
Use the Brightness setting to obtain the optimum
image brightness (exposure) when the subject is
much brighter or darker than the background.

hCorrection range: 11 steps 

(–1.5 EV to +1.5 EV in 0.3 EV increments) 
See P.108 for information on EV.

●

The Brightness setting is disabled in the following
situations:
i When the flash is used in Auto or Red-Eye

Reduction mode.

i When dark scenes are shot in Forced Flash mode.

h Copying of printed text (black characters on

white paper) (+1.5 EV)

h Backlit portraits (+0.6 EV to +1.5 EV)
h Very bright scenes (such as snowfields) and

highly reflective subjects (+0.9 EV)

h Shots made up predominantly of sky 

(+0.9 EV)

h Spotlit subjects, particularly against dark

backgrounds (–0.6 EV)

h Copying of printed text (white characters on

black paper) (–0.6 EV)

h Scenes with low reflectivity, such as shots of

pine trees or dark foliage (–0.6 EV)

◆

◆

a

AUTO: Automatic adjustment

(Shooting to show the ambience of the

light source)

c

: Shooting outdoors in fine weather

x

: Shooting in shade

b

: Shooting  under  “Daylight” fluorescent

lamps

n

: Shooting under “Warm White” fluorescent

lamps

m

: Shooting under “Cool White” fluorescent

lamps

z

: Shooting in incandescent light

✽ The white balance setting is ignored when the flash is

used. To achieve the desired effect in your shot, set
the flash to Suppressed Flash mode (

➡P.40).

This mode can be selected in the “

2

” still

image mode.
In Auto mode, the correct white balance may not
be obtained for subjects such as close-ups of
people’s faces and shots taken under a special
light source.
Change the white balance setting when you
want to take a picture with the correct balance.
See P.109 for more information on the white
balance.

s WHITE BALANCE (SELECTING THE LIGHT SOURCE)