Kodak CX6445 Manuale Utente
27
Chapter 2
Setting Exposure Compensation
Use Exposure Compensation to control how much light enters the camera. This
setting is useful for taking pictures in high-contrast scenes, or for retaking
pictures when you are not satisfied with the brightness.
Adjust the exposure by plus or minus 2 steps in 1/2-step increments.
NOTE: Exposure Compensation cannot be used with Long Time Exposure.
setting is useful for taking pictures in high-contrast scenes, or for retaking
pictures when you are not satisfied with the brightness.
Adjust the exposure by plus or minus 2 steps in 1/2-step increments.
NOTE: Exposure Compensation cannot be used with Long Time Exposure.
1
In any Still mode, press the Menu button.
2
Press
to highlight Exposure Compensation
, then press the OK
button.
3
Press
to select the Exposure
Compensation setting.
!
If pictures are too light, decrease the
value.
value.
!
If pictures are too dark, increase the
value.
value.
4
Press the OK button to accept the change.
5
Press the Menu button to exit the menu.
6
Use the camera screen to frame your
subject. Press the Shutter button half-way
and hold
subject. Press the Shutter button half-way
and hold
to set the focus, then press the
rest of the way down
to take the picture.
This setting remains until you change the
Mode dial or turn off the camera.
Mode dial or turn off the camera.