Kodak CX6445 Manuale Utente
87
Chapter 10
SD/MMC Cards and Internal Memory
Cannot transfer
pictures.
(The Add New
Hardware
Wizard cannot
locate drivers.)
pictures.
(The Add New
Hardware
Wizard cannot
locate drivers.)
Software is not installed. Disconnect USB cable. (If using
camera dock, disconnect cable and
remove camera from dock). Install
EasyShare software (
remove camera from dock). Install
EasyShare software (
).
Software is installed
incorrectly.
incorrectly.
Disconnect the USB cable. Close all
open applications. Uninstall, then
re-install the software (
open applications. Uninstall, then
re-install the software (
).
To uninstall, go to Start/Settings/
Control Panel/Add/Remove
Programs.
Control Panel/Add/Remove
Programs.
USB cable was
connected during
software installation.
Camera is listed as an
unknown device (PC
only)
connected during
software installation.
Camera is listed as an
unknown device (PC
only)
Disconnect the USB cable.
Delete camera from Device
Manager: Right-click on My
Computer, go to
Properties/Hardware/Device
Manager/Other Devices/ (delete
this entry— ?Kodak ES camera)
Delete camera from Device
Manager: Right-click on My
Computer, go to
Properties/Hardware/Device
Manager/Other Devices/ (delete
this entry— ?Kodak ES camera)
Problem
Cause
Solution
The camera
does not
recognize
SD/MMC card.
does not
recognize
SD/MMC card.
The card may not be
SD/MMC certified.
SD/MMC certified.
Purchase a certified SD/MMC card.
The card may be
corrupt.
corrupt.
Reformat the card (
Caution: Formatting erases all
pictures and videos, including
protected files.
pictures and videos, including
protected files.
Card is not properly
inserted in camera.
inserted in camera.
Insert a card into the slot, then push
to seat (
to seat (
).
Problem
Cause
Solution