Nikon DS-2MBW Manuale Utente

 

VI Basic Operations 

 

NETWORK 

 

 

4    Using the DS-L1 via a Network 

- 101 - 

 

 

You can run FTP commands on your PC to get images from the DS-L1. 

NOTE:  Always be sure to consult the network administrator in your organization 

before executing FTP commands. Your organization’s network may have 
been set up in a unique manner, so invalid operations might cause a 
problem on your network. 

 

 

1) 

Enter the IP address of the DS-L1 from the MS-DOS prompt (command prompt) of 
Windows to connect to the DS-L1. 
(Example: FTP 192.168.10.2) 

2) 

Execute the Is command to search for a directory named RAMIBOX. 

3) 

Execute the cd RAMIBOX command. 
The following virtual file names will be displayed: 

•  IMG***.bmp 

•  IMG***.jpg 

 

Here, *** represents dimensional values such as 1680 or 1280 indicating image size. 
The time of day for the files displayed at this time is 0 hours 0 minutes. The actually 
acquired files are given the time of day when you issued the Get command. 

4) 

Execute the Get command for one of the files, and the latest image that is in the DS-L1 at 
that point will be downloaded to the PC. 

 

 

 

NOTE:  If frequent access is made to the DS-L1 connected to a Windows PC via a 

USB cable, image file acquisition may fail. If this happens, stop accessing 
the DS-L1 via a USB cable for a while.