Nikon DS-2MBW Manuale Utente

 

VI Basic Operations 

 

SETUP 

 

 

1  Preparations Before Photographing 

- 29 - 

Enter a date and time. 

NOTE:  If the DS-L1 remains turned off for extended periods, its internal timer may 

slow down or stop. When the DS-L1 starts up, it displays the date and time 
set in its timer (flashes for about 8 seconds). If you have shut off the DS-L1 
for one week or longer, check the date and time shown on the DS-L1 when 
you turn it back on. 

If you leave the DS-L1 idle for a certain time, it will automatically switch to power-save 
mode. You can set how long the DS-L1 will wait before switching to power-save mode.   
Setting a value of “00” will disable the power-save function. 

Select the speed at which the mouse pointer moves across the screen when you move the 
mouse. 

Select the magnification rate of the electronic zoom, at which rate the image is zoomed in 
or out. (Two or more choices can be selected.) 

Save to Card / Save to Server / Print 
Select one of these functions to save to a CF card, to save to the FTP server, or to output 
to a printer you want assigned to the CAPTURE button on the DS-L1 and the DS Remote 
Controller DS-RC or to the CAPT. button on the menu. The CAPTURE button can be 
assigned two or more functions at the same time. 

This is an external interface output. 
If you select ON, a strobe synchronizing signal is output from the EXTERNAL OUT 
connector when capturing an image. 
For normal use, we recommend selecting OFF. If you select ON, a time lag will occur in 
external output with respect to the displayed image on the monitor. 

The number at the bottom-right indicates the firmware version.   
The firmware version in the example shown is Ver = 220.0202.1717.040825. This is the 
firmware Ver. 2.20. 
300.****.****.** **** or later version is the firmware compatiple with 2M/5M cameras.