Liebert 308 415 Manuale Utente

Inspection and Installation

3.4

Preparing a 1-, 2-, 3- or 4-Fan Condenser for Moving and Installation

3.4.1 Removing the Skid and Attaching Slings

1. Install the legs, provided by Liebert, on the condenser with the mounting bolts, also provided by

Liebert. Liebert recommends using a 5/8" socket and ratchet.

2. Place slings or equivalent items through holes in the legs on 1, 2- and 3-fan condensers (see Step

2 and Step 3 in Figure 13). Use eyebolts for attaching a sling or similar equipment to 4-fan

units.

3. Using spreader bars and a crane, or similar lifting equipment, lift the condenser off the skid to

allow safely turning the condenser upright.

4. Lift the condenser and move it to the installation location.

Figure 13 Attaching legs and sling to a 1-, 2-, 3- or 4-fan condenser for moving

Step 1

Step 2

Step 3

Three-fan unit shown for illustration.

Method for 1-fan and 2--fan condensers is the same.

Attach sling to 4-fan condensers with eyebolts.