Viewsonic NMP-500 Manuale Utente

4

In the Browser Proxy IP field, type an IP address if the Browser Proxy was Enabled.

5

In the Browser Proxy PORT field, type the port if the Browser Proxy was Enabled.

6

In the Default transparency between OSD and video layer field, type a number that is 

between 0 to 255: (128 is average where video and graphics blend together). Also, see 
examples in the Transparency section of this guide.

• 0 = video only, no graphics

• 255 = graphics only, no video

7

In the Start screen display time field, type the number of milliseconds you want the initial 

screen to be displayed at startup. (1 millisecond = 1/1000 second)

8

In the Screen Height field, type the height of the screen that is displaying your graphics 

image.

9

In the Screen Width field, type the width of the screen that is displaying your graphics image.

10 If any changes were made to this screen, do the following: 

• To enable the changes, click Apply

• To save the changes, click the Administration menu > click Save Configuration > click Save.