Sony RM-AV2100T Manuale Utente
51
GB
1
While pressing COMMANDER
OFF, press PROGRAM + and the
Component Select button whose
display you want to modify.
OFF, press PROGRAM + and the
Component Select button whose
display you want to modify.
2
Press the key you want to display.
Each time the key is pressed, it is
selected and deleted alternately.
A selected key stops flashing and
stays lit.
selected and deleted alternately.
A selected key stops flashing and
stays lit.
3
Repeat Step 2 until all necessary
keys are set.
keys are set.
4
Press COMMANDER OFF.
Note
For components that have few keys on the full-
function display, the basic-function display can
be the same as the full one. In this case, you
cannot modify the basic-function display.
function display, the basic-function display can
be the same as the full one. In this case, you
cannot modify the basic-function display.
To clear the settings on the basic-
function display
function display
1
While pressing COMMANDER
OFF, press PROGRAM + and a
Component Select button.
OFF, press PROGRAM + and a
Component Select button.
2
While pressing the CHANGE key,
press the Component Select
button again.
press the Component Select
button again.
3
Press COMMANDER OFF.
Note
If you clear the settings on the basic-function
display using the procedure above, the display
returns to its original key settings. It doesn’t
clear the learned signals from keys.
display using the procedure above, the display
returns to its original key settings. It doesn’t
clear the learned signals from keys.