Atlantis Land A02-PSU_GX02 Manuale Utente

                                                                        ENGLISH

 

20 

Follow these steps for a trouble-free start of the print server 
operations with your print server. 
1.  Confirm proper operation of the printer to be connected 

to the print server. 

2.  When you have confirmed proper operation of the printer, 

turn off its power. 

3.  Confirm that your network is operating normally. 
4.  Connect the print server to the network (through the RJ-

45 connector of the print server). 

 

Configuration problems may result if the 
print server is powered up without first 
establishing its network connection. 

 

Please follow this procedure to avoid 
complications at the configuration 
stage. 

 

5.  While the printer is powered off, plug the print server to 

the printer (parallel or USB interface). 

6.  Turn on the printer’s power. 
7.  Connect the DC end of the AC Power adapter to the DC 

power input socket of the print server and the AC end to 
the wall outlet.  This will supply power to the print server 
immediately. 

 

Your print server is built with a default 
IP Address.  To prevent from any 
conflict in your network, it is 
recommended to use the PS-Utility 
program to change the IP setting when 
there is some other device’s IP Address 
is the same as the print server’s default 
IP Address.