Garmin Rino 120 Manuale Utente

A

PPENDIX

 > 

T

RANSFERRING

 M

AP

S

OURCE

 D

ATA

1.  Remove weather cap from the Power/Data Port 

on the back of the unit by lifting up on the rubber 

weather cap.

2.  Connect the serial port connector on the cable to 

an available serial port on your computer. 

3.  Connect the remaining cable connector to the 

back of the Rino 120 by orienting the slot on the 

connector with the indexing bar on the back of the 

unit and push the connector until it is fully seated 

in the unit. 

4.  Turn on the Rino 120 and follow instructions for 

map data transfer provided in the MapSource 

User’s Manual. See also the “Interface Setup 

Page” section for unit interface settings.