Braun 32899 Rev A Manuale Utente

Page 16

Kneeling is the lowering motion of 
the Rampvan electro-mechanical
rear suspension.  The kneel sys-
tem lowers the rear of the vehicle.  
Lowering the rear of the vehicle 
reduces the slope of the ramp.

.QHHO2Q2II)HDWXUHA Kneel 
On/Off feature is incorporated into 
the One-Touch electronic control 
system.  This feature provides 
the option of kneeling the ve-
hicle when operating the power 
door and power ramp.  The Kneel 
On/Off switch must be in the ON 
position in order for the kneeling 
system to be activated (see photo 
at right).  See page 12 for addi-
tional Kneel On/Off switch details.

The kneel system is automatically 
activated by the One-Touch elec-
tronic control system.

When a control switch is pressed 
to start the Open functions, the 
power door opens, the kneel sys-
tem lowers the rear of the vehicle 
and the ramp deploys.

When the Close functions are acti-
vated, the vehicle starts to raise at 
the same time the ramp starts to 
retract (stow).

Note: If the Rampvan is in the 
kneeled position and the vehicle 
is shifted out of Park, the vehicle 
will raise and you will hear a very 
rapid pulsing tone (cricket tone).

Press this switch to ON
to enable kneel feature. 

Press this switch to OFF
to disable kneel feature. 

Note:  If the Rampvan is in the 
kneeled position and the Close 
functions are activated, the vehicle 
will raise whether the Kneel On/Off 
switch is on or off.