Pelco DX9000H-C SERIES Manuale Utente

C685M-D (2/03)

13

The following is required:

Dedicated LAN of four or more ViewStations requires a minimum network of 100BaseT (100 Mbit/sec)

Integration within an existing LAN/WAN requires a network of 100BaseT (100 Mbit/sec)

1.

Refer to Figure 3. On the back of the recorder, connect a shielded network cable to the Ethernet connector.

2.

Connect the other side of the shielded network cable to one of the ports on the Ethernet hub.

The installation of the recorder and its associated video storage units is complete. If your system has more than one recorder,
return to the beginning of the 

Installation section to install additional recorders and their storage units.

When all recorders and storage units are installed, proceed to the installation of the ViewStation(s), after which your DX9000
system will be ready to operate.