Toshiba 42XV600A Manuale Utente

Pagina di 52
6
7) Never cut, break, modify, twist, bunch up or 
bent the cord or apply excessive force or 
tension to it.
Never place heavy objects on the cord or allow
it to overheat as this may cause damage, a 
fi re or an electric shock. Contact a service 
technician if the power cord is damaged.
8) If there is thunder or lightning, never touch 
the aerial cable or other connected cables.
You may suffer an electric shock.
Service
1) Never repair, modify or disassemble the TV 
by yourself.
It may cause a fi re or an electric shock. Consult 
a service technician for inspection and repairs.
2) When a malfunction occurs, or if smoke or 
an unusual odor comes from the TV, turn off 
the TV and remove the power plug from the 
outlet immediately.
Make sure that the smoke or smell has
stopped, then contact a service technician. 
If the TV is still used in this condition, it may
cause a fi re or an electric shock.
3) If the TV is dropped or the cabinet is broken, 
turn off the TV and remove the power plug 
from the outlet immediately.
If the TV is still power used in this condition,
it may cause a fi re or an electric shock. If the
cabinet is broken, be careful when handling the
TV to prevent an injury.
Contact a service technician for inspection and repair.
4) When the TV reaches the end of its useful 
life, ask a qualifi ed service technician to 
properly dispose of the TV.
Note:
The lamp unit contains a small amount of
mercury. Disposal of mercury may be regulated
due to environmental considerations.
Dispose of the used lamp unit by the approved
method for your area. For disposal or recycling
information, please contact your local authorities.
Cleaning
1) Remove the power plug before cleaning.
Never use solvents such as benzine or thinner
to clean the TV.
•  These solvents may distort the cabinet or
damage its fi nish.
•  If rubber or vinyl products remain in contact
with the TV for a long time, a stain may result.
If the cabinet becomes dirty, clean it with a soft,
dry cloth.
When cleaning the surface of the LCD display,
wipe the panel surface gently with a soft, dry
cloth.
Introduction