Toshiba 42L6200U Manuale Utente
169
Advanced features
Network Device Setup
11
Press the ( / arrow) buttons to adjust to the desired volume.
Press the OK button.
Press the OK button.
12
If you want to wake up the TV by using the Media Controller,
press the ( / arrow) buttons to select Yes. Press the OK
button.
press the ( / arrow) buttons to select Yes. Press the OK
button.
Device Name setup
The device name as a Media Renderer can be changed.
1
Press the MENU button. Select NETWORK, Network
Device Setup, and then press the OK button.
Device Setup, and then press the OK button.
2
Press the ( / arrow) buttons to select Device Name Setup,
and then press the OK button.
and then press the OK button.
3
Select the Device Name field. Press the OK button. The
Software Keyboard screen appears.
Software Keyboard screen appears.
4
Input the device name by using the Software Keyboard. To
save your setting, press the BLUE button.
save your setting, press the BLUE button.
5
Select Done. Press the OK button.
The maximum number of characters allowed for the device name is
15. Only 0-9, A - Z can be used in the device name.
15. Only 0-9, A - Z can be used in the device name.
Media Controller setup
You can limit which Media Controller can control this TV. If
Access Control is enabled, only those Media Controllers with a
check will be allowed to control the TV.
Access Control is enabled, only those Media Controllers with a
check will be allowed to control the TV.
1
Press the MENU button. Select NETWORK, Network
Device Setup, and then press the OK button.
Device Setup, and then press the OK button.
2
Press the ( / arrow) buttons to select Media Renderer
Setup, and then press the OK button.
Setup, and then press the OK button.
3
Press the ( / arrow) buttons to select Media Controller
Setup. Press the OK button.
Setup. Press the OK button.
4
Press the ( / arrow) buttons to highlight Access Control.
Press the ( / arrow) buttons to select On.
Press the ( / arrow) buttons to select On.
5
Press the ( / arrow) buttons to select Media Controller.
Press the OK button.
Press the OK button.
6
Press the ( / arrow) buttons to select the MAC address of
Media Controller you want to accept.
Media Controller you want to accept.
NOTE