Antex electronic SX-3 Manuale Utente
13
1. Select Control Panel in the Main group of the Program Man-
ager. Then select Drivers.
2. Select "Antex Audio Driver for Windows" from the list of in-
stalled drivers. Click on Setup.
3. To set adapter type:
"Antex Audio Driver Setup" displays the adapter types assigned
to adapters 1-4. Change the type by using the drop down
menus for each adapter. Information about the number of de-
vices, I/O address, and interrupt number are displayed to the
right of each adapter.
to adapters 1-4. Change the type by using the drop down
menus for each adapter. Information about the number of de-
vices, I/O address, and interrupt number are displayed to the
right of each adapter.
4. To set the number of devices, I/O address, or interrupt number:
Select Advanced in "Antex Audio Driver Setup". Select an
adapter to reconfigure.
adapter to reconfigure.
Change the number of devices, I/O address, or interrupt num-
ber by selecting the appropriate buttons. Invalid choices are
displayed in gray. Note: The I/O address and interrupt must
match the jumper settings on the board. For more information
refer to JUMPER SETTINGS.
ber by selecting the appropriate buttons. Invalid choices are
displayed in gray. Note: The I/O address and interrupt must
match the jumper settings on the board. For more information
refer to JUMPER SETTINGS.
Test new settings by selecting Test.
NOTE: The driver version number and date displayed in the
middle left of the "Antex Advanced Setup" screen. Refer to this
information when reporting problems to Antex Technical Sup-
port.
middle left of the "Antex Advanced Setup" screen. Refer to this
information when reporting problems to Antex Technical Sup-
port.