Toshiba P42LHA Manuale Utente
24
A Guide to Simple Problem Solving
Before calling service personnel, please check the following chart for a possible cause to the trouble you are
experiencing.
experiencing.
Symptom
Check these things
Page
No picture
．Make sure the power cord is plugged in.
17
．Maybe the power is Off or Standby.
17
．Check whether the auxiliary equipment is connected.
14
．Check the input setting is correct.
14
．Signal may not be suitable.
14
The remote control does not
operate
operate
．Make sure the battery is inserted matching the + and – marks of
the battery compartment.
12
．The battery may be exhausted.
12
．Use the remote control aiming at the remote control sensor.
11
The picture color is pale, or not
clear
clear
．Check the picture quality adjustment.
19
．If you are using YUV terminals, make sure cables are correctly
connected.
N/A
Factory default setting
Item
Default
Item
Default
Power switch
Off
Color temp.
User
Brightness
50
Red
225
Contrast
50
Green
225
Hue
0
Blue
225
Saturation
50
Language
English
Flesh-tone
Off
Light Sensor
Off
Gamma Correction
Off
Light Sensor Value
25
Auto Config
On
Input signal selection and its contents
This page can be displayed by using [Down] key while
at the Main Menu page, appeared in page 21.
This page is convenient to check the incoming resolution
as indicated here as 1024x768@60Hz.
“IGP” is indicating that the input signal is coming from
Graphic card signal, as Input Graphic Processor.
When Video signal is selected, “IVP”, Input Video Processor
will appear at lower portion indication.
This page can be displayed by using [Down] key while
at the Main Menu page, appeared in page 21.
This page is convenient to check the incoming resolution
as indicated here as 1024x768@60Hz.
“IGP” is indicating that the input signal is coming from
Graphic card signal, as Input Graphic Processor.
When Video signal is selected, “IVP”, Input Video Processor
will appear at lower portion indication.