Toshiba 65HT2U Manuale Utente

Chapter 6: Using the TV’s features

Selecting the optical audio output

format

You can use this feature to select the optical audio
output format when you connect a Dolby Digital
decoder or other digital audio system to the

Optical

Audio Out terminal on the TV (see “Connecting a

digital audio system” on page 18).

To select the optical audio output format:

1無

Press

and open the

Sound menu.

2無

Highlight

Audio Setup and press

3無

In the

Optical Output Format field, select either

Dolby Digital or PCM, depending on your device.

4無

To save the new settings, highlight

Done and press

. To revert to the factory defaults, highlight

Reset

and press

Using the Dolby

Digital Dynamic

Range Control feature

This dynamic range control feature causes Dolby

Digital dynamic range to be further compressed,

allowing you to switch from digital to analog

broadcasts at the same dynamic range.

To use the Dolby Digital Dynamic Range

Control:

1無

Press

and open the

Sound menu.

2無

Highlight

Audio Setup and press

3無

In the

Dolby Digital Dynamic Range Control field,

select

Compressed. When Standard is selected,

the audio is output with minimal compression.

4無

To save the new settings, highlight

Done and press

. To revert to the factory defaults, highlight

Reset and press

Note:

• This feature is available when turned to a

digital RF channel with the Dolby Digital

signal.

• The Dolby Digital Dynamic Range Control will

function in relation to Optical Output Format

(PCM mode).

Using the Locks menu

The Locks menu includes the Enable Rating
Blocking, Edit Rating Limits, Input Lock, Panel
Lock, GameTimer, and New PIN Code features. You
can use these features after entering the correct PIN
code.

Entering the PIN code

1無

Press

and highlight the

Locks menu icon.

2無

Press q, which displays the PIN code entry
screen.

•

The

Lock System screen (below) appears if a

PIN code has not been stored. Press the number
buttons to enter a new four-digit code, enter the
code a second time to confirm, and press

•

The

Locks/Active screen appears if the PIN code

is already stored. Use the number buttons to
enter your four-digit code and press

If the wrong PIN code is entered, the message “Incorrect
PIN code, please try again!” appears. Highlight

Retry

and press

. Enter the code again and press

When the correct PIN code is entered, the

Locks menu

opens.
Note:
PIN code can not be set to “0000”.

If you cannot remember your PIN code

While the PIN code entering screen is displayed, press

four times within five seconds. The PIN code will be

cleared and you can enter a new PIN code.

(continued)