Toshiba 24V4210U Manuale Utente
150
Troubleshooting
Remote control problems
If you hear no sound, try setting the MTS feature to Stereo mode,
see
see
.
If you are not receiving a second audio program from a known SAP
source, make sure the MTS feature is set to SAP mode, see
source, make sure the MTS feature is set to SAP mode, see
If you hear audio that seems incorrect for the program you are
watching (such as music or a foreign language), the SAP mode may
be on. Set the MTS feature to Stereo mode, see
watching (such as music or a foreign language), the SAP mode may
be on. Set the MTS feature to Stereo mode, see
If you connect a computer using either the PC IN terminal or an
HDMI
HDMI
®
terminal, make sure that the audio setting is properly set,
see.
Remote control problems
Remove all obstructions between the remote control and the TV.
Replace the remote control’s batteries, see
Your TV’s remote control may not operate certain features on your
external device. Refer to the User’s Guide for your other device to
determine its available features. If your TV remote control does not
operate a specific feature on another device, use the remote control
that came with the device, see
external device. Refer to the User’s Guide for your other device to
determine its available features. If your TV remote control does not
operate a specific feature on another device, use the remote control
that came with the device, see
If the TV still does not act as expected, perform the Reset Factory
Defaults procedure, see
Defaults procedure, see
Channel tuning problems
Ensure that the remote control is set to the correct device mode, see
.
The Auto Tuning feature may have erased the channel from
memory. Add the channel to the channel memory, see
memory. Add the channel to the channel memory, see
The Lock feature may have blocked the channel. Unblock the
channel, see
channel, see
If you cannot tune digital channels, check the antenna
configuration. If the problem persists, clear all channels from the
channel list and reprogram channels into the memory, see
configuration. If the problem persists, clear all channels from the
channel list and reprogram channels into the memory, see
. For additional
information, see
. If
the problem persists, use the Reset Factory Defaults procedure, see
.