Toshiba W43 Manuale Utente
40
En
gli
s
h
CONTROLS AND FEATURES
Assisted Setup
a
In the Network menu, press
B
/
b
to select
Network Setup and press OK.
b
Press
B
/
b
to select Wireless Setup and press
OK.
c
Press
B
/
b
to select Assisted Setup and press
OK.
d
Press
B
/
b
to select the desired AP and press
OK.
NOTE: Check the MAC address on the label of the
AP or in the manual, and select your AP.
AP or in the manual, and select your AP.
e
Highlight Security Key and press OK. The
Software Keyboard window will appear.
Software Keyboard window will appear.
f
Input the Security Key by using the Software
Keyboard (see page 44). To save your setting,
press the GREEN button.
Keyboard (see page 44). To save your setting,
press the GREEN button.
NOTE:
• The Security Key must adhere to these
• The Security Key must adhere to these
conditions:
- TKIP/AES: 8-63 ASCII or 64 Hex characters
- WEP: 5 or 13 ASCII or 10 or 26 Hex characters
• There is only one key ID to set for WEP
encryption.
g
Highlight Done and press OK.
NOTE: If Network Name is not displayed, see
step 3 and 4 in Manual Setup to set Network
Name before pressing Done.
step 3 and 4 in Manual Setup to set Network
Name before pressing Done.
NOTE: Settings are not saved if BACK is pressed before
Done is selected.
Done is selected.
Manual Setup
a
In the Network menu, press
B
/
b
to select
Network Setup and press OK.
b
Press
B
/
b
to select Wireless Setup and press
OK.
c
Press
B
/
b
to select Manual Setup and press
OK.
d
Press
B
/
b
to select Network Name and press
OK. The Software Keyboard window will appear.
e
Input the Network Name by using the Software
Keyboard (see page 44). To save your setting,
press the GREEN button.
Keyboard (see page 44). To save your setting,
press the GREEN button.
f
Press
B
/
b
to select Authentication and press
c
and
B
/
b
to select Open System, Shared Key,
WPA-PSK or WPA2-PSK.
g
Press
B
/
b
to select Encryption and press
c
and
B
/
b
to select None, WEP, TKIP or AES.
NOTE:
• Certain encryption types are only compatible
• Certain encryption types are only compatible
with specific authentication types.
- When Authentication is Open System, only
WEP or None is compatible.
- When Authentication is Shared Key, only WEP
is compatible.
- When Authentication is WPA-PSK or WPA2-
PSK, only TKIP or AES is compatible.
• When incompatible Authentication/Encryption
pairings are detected, a warning message will be
displayed, and no connection attempt will be
made until the incompatibility is resolved.
displayed, and no connection attempt will be
made until the incompatibility is resolved.
• There is only one key ID to set for WEP
encryption.
h
Press
B
/
b
to select Security Key and press OK.
i
Input the Security Key by using the Software
Keyboard (see page 44). To save your setting,
press the GREEN button.
Keyboard (see page 44). To save your setting,
press the GREEN button.
NOTE: This item is greyed out when Encryption is
None.
None.
j
Highlight Done and press OK.
NOTE: When Encryption is None, a message will
appear. Press
appear. Press
C
/
c
to select Yes and press OK.
NOTE: Settings are not saved if BACK is pressed before
Done is selected.
Done is selected.
Easy Setup
Assisted Setup
Manual Setup
< Wireless Setup