NEC 50MP2 Manuale Utente

7

POWER/STANDBY

LUME

UP

INPUT SELECT
/EXIT

LEFT/—

RIGHT/+

Approx.
7m/ 23ft

Connect the supplied remote cable to the remote control’s
remote jack and the “REMOTE CONTROL” terminal on
the monitor.
When the cable is connected, the mode automatically
switches to wired remote control. When the wired remote
control mode is used, the remote control can be operated
even if no batteries are loaded.

* Use the remote control within a distance of about 7 m/

23ft. from the front of the monitor’s remote control sensor
and at horizontal and vertical angles of up to approximately
30°.

* The remote control operation may not function if the

monitor’s remote control sensor is exposed to direct
sunlight or strong artificial light, or if there is an obstacle
between the sensor and the remote control.

• Do not drop or mishandle the remote control.
• Do not get the remote control wet. If the remote control

gets wet, wipe it dry immediately.

• Avoid heat and humidity.
• When not using the remote control for a long period,

remove the batteries.

• Do not use new and old batteries together, or use different

types together.

• Do not take apart the batteries, heat them, or throw them

into a fire.

• When using the remote control in the wireless condition,

be sure to unplug the remote cable from the REMOTE
CONTROL terminal on the monitor.

SPEAKERS  MUST

HAVE  MORE  THAN

7WATT  RATING

IMPEDANCE  6  OHM

RIGHT

LEFT

EXTERNAL
CONTROL

REMOTE
CONTROL

CONTROL
LOCK

ON     / OFF

RGB  3

( D i g i t a l   RGB )

RGB  1

R / CR / PR

L ( MONO )

VIDEO  1

L ( MONO )

G / Y

B / CB / PB

HD

VD

R

VIDEO  2

VIDEO  3

R

Y

CB / PB

CR / PR

L ( MONO )

R

EXTERNAL
CONTROL

CONTROL
LOCK

ON     / OFF

REMOTE
CONTROL

Remote Control
Cable

To Remote Jack