Fujitsu P50XTS51E Manuale Utente
E-23
English
Deutsch
Espa
ñol
Fran
ç
ais
Ital
iano
Portugu
ê
s
日 本 語
Póññêèé
中文
• Connect the audio signal cables to the digital output and the analog audio output terminals.
* The signal input as analog input is output as analog audio and digital audio.
* The signal input as digital input is output as digital audio. The signal input as digital input is not output as analog audio.
* The digital audio input terminal on the display complies with a sampling frequency of 48 kHz.
* The signal input as digital input is output as digital audio. The signal input as digital input is not output as analog audio.
* The digital audio input terminal on the display complies with a sampling frequency of 48 kHz.
In the case of outputs with another frequency, connect to an audio system (amplifier)*.
WHEN OUTPUTTING AUDIO SIGNALS TO AN AUDIO AMPLIFIER
AV Selector rear panel
To digital audio input
To analog audio input
To digital audio output
To analog audio output
Note
• Unplug the power cord from the AC outlet before you connect external components.
• Also refer to the instructions for the component to be connected.
• When inputting audio, connect to the terminals corresponding to the used video input or RGB input.
• Also refer to the instructions for the component to be connected.
• When inputting audio, connect to the terminals corresponding to the used video input or RGB input.
MHD01862_E.book 23 ページ ２００５年１１月２５日 金曜日 午後８時５４分