Fujitsu P42-2 Manuale Utente

 

MYRICA P42-1A / P42-2 / P50-2 

A26361-K1040-Z120-1-M119, edition 3 

English - 25 

► 

Press the MENU button to open the OSD menu. 

► Mark 

the 

PICTURE menu item with the 

 / 

 buttons. 

► 

Press the MENU button to activate the menu item. 

The buttons available to you for setting the options are shown in the menu footer. 

 

 

With this function you set the picture mode. 
The contrast, brightness, colour and focus of the picture are set to optimum 
values depending on the picture mode. 
Possible values: Standard, Vivid, Mild, User. 

With this button you set the colour temperature. 
Possible values: Cool2, Cool1, Normal, Warm1, Warm2. 

With this function you switch the picture correction (Noise Reduction) on or 
off. 
Possible values: On, Off 

With this function you set the picture format. 
Possible values: 16:9, PANORAMA, ZOOM1, ZOOM2, 4:3. 

With these functions you set the position and the synchronisation of the 
picture display. 
To set the picture display, first use the Auto function and correct the picture 
display and, if necessary, then with the other functions. 
These functions are only available when PC is selected as the signal 
source. 

With this function you set the horizontal picture 
position. 

With this function you set the vertical picture position. 

With this function you fine-tune your display to 
eliminate picture interference. 

Geometry 
(in PC mode only) 

With this function you optimally set the picture display 
automatically.