Fujitsu P42-2 Manuale Utente
MYRICA P42-1A / P42-2 / P50-2
A26361-K1040-Z120-1-M119, edition 3
English - 3
●
The device may not be placed on the floor.
●
he device automatically sets itself to the correct voltage within the range from 100 V to 240 V.
Ensure that the local mains voltage lies within these limits.
Ensure that the local mains voltage lies within these limits.
●
Ensure that the power socket on the device or the earthed mains outlet is freely accessible.
●
The ON/OFF switch does not disconnect the device from the mains voltage. To completely
disconnect the mains voltage, remove the power plug from the socket.
disconnect the mains voltage, remove the power plug from the socket.
●
Lay all cables so that nobody can stand on them or trip over them. When attaching the device,
observe the relevant notes in the "Preparing for use" chapter.
observe the relevant notes in the "Preparing for use" chapter.
●
If you use a different PC data cable from the one supplied, ensure that it is adequately
shielded. CE conformance and optimum picture quality are guaranteed only if you use the data
cable supplied.
shielded. CE conformance and optimum picture quality are guaranteed only if you use the data
cable supplied.
●
No antenna or data transfer cables should be connected or disconnected during a
thunderstorm.
thunderstorm.
●
Make sure that no objects (e.g. jewellery chains, paper clips, etc.) or liquids get inside the
device (danger of electric shock, short circuit).
device (danger of electric shock, short circuit).
●
The device is not waterproof! Protect the device from spray water (rain, sea water).
●
In emergencies (e.g. damaged casing, elements or cables, penetration of liquids or foreign
matter), switch off the unit, disconnect the power plug and contact your sales outlet or our help
desk.
matter), switch off the unit, disconnect the power plug and contact your sales outlet or our help
desk.
●
The device must be disposed of in accordance with the local regulations for disposal of special
waste. During handling and disposal, the safety regulations applicable to fluorescent materials
must be observed.
waste. During handling and disposal, the safety regulations applicable to fluorescent materials
must be observed.
●
Only qualified technicians should repair the device. Unauthorised opening and incorrect repair
may greatly endanger the user (electric shock, fire risk).
may greatly endanger the user (electric shock, fire risk).
●
You may set only those resolutions and refresh rates specified in the "Technical data" chapter.
Otherwise you may damage your monitor. If you are in any doubt, contact your sales outlet or
our help desk.
Otherwise you may damage your monitor. If you are in any doubt, contact your sales outlet or
our help desk.
●
Use a screen saver with moving images in PC mode and activate the power management for
your monitor to prevent still images from "burning in".
your monitor to prevent still images from "burning in".
●
Keep this operating manual together with your device. If you pass on the device to third parties,
you should include this manual.
you should include this manual.