Aiphone FK1629 B 0811YZ Manuale Utente
28
E-mail setting
You can send an e-mail when calling or send error messages
etc. by e-mail. Up to 3 mail addresses can be set.
etc. by e-mail. Up to 3 mail addresses can be set.
NOTES:
Prepare an e-mail account for this function beforehand.
•
Make sure to enter the system name at
•
[Network setting:
Individual]
– [System name] to display the title with an e-mail.
Make sure to enter primary and/or secondary DNS server
•
information at [Network setting: Individual] to all the IP units.
Click
1
E-mail setting in the table of contents.
Set the following settings.
2
[Email destination address]:
•
Enter up to 3 mail addresses (destination addresses).
[Email source address]:
•
Enter the source mail address.
[SMTP authentication]:
•
Confi gure SMTP authentication as required by source
E-mail provider.
E-mail provider.
[Language selection]:
•
Set the language you want to use for entering the system
name.
name.
You can use English only for the body of the message.
*
[Mailing event]:
•
Select mailing events by setting the target ones to [ON].
Click
3
Temporarily stored
to save the current setting
results temporarily.
If you wish to cancel the setting results you have made,
*
click a title in the table of contents or “Refresh” in the
web browser menu.
Downloading/uploading setting data
[Setting fi le]
[Setting fi le]
You can download the setting data you have made into a fi le
and save it on the PC. On the contrary, you can upload the
setting data from the PC.
and save it on the PC. On the contrary, you can upload the
setting data from the PC.
It is recommended to download the setting data as a backup
*
copy after you fi nish making settings or setting changes.
■ When downloading setting data onto the PC
Click
1
Downloading setting data in the table of
contents.
Click
2
Download
to download the current setting data
into a fi le.
■ When uploading setting data
Click
1
Uploading setting data in the table of contents.
Click
2
Upload
to upload the setting data from the PC
to the system.
You can select the setting data fi le from another window,
and upload it.
and upload it.
Update the system.
3
Refer to “Updating the system” below.
*
NOTE:
Uploading the setting data will overwrite the current data.
Updating the system
[Updating the system]
[Updating the system]
Update the system with the setting data you have entered
(currently stored temporarily).
(currently stored temporarily).
Click
1
Updating the system in the table of contents.
Click
2
Update
to update the system with the setting
data currently stored temporarily.
NOTE:
Do not turn off the system while updating the system.