Hitachi DZ-BD10HA Manuale Utente

Pagina di 121
91
Ad
di
ti
on
al I
n
fo
rm
a
tio
n
Disc almost full.
The remaining free space of the disc is less than one 
minute for video. Delete unwanted scenes, or use another 
disc.
66
Disc error has 
occurred.
• Format the disc before using the camcorder. Formatting 
the disc will delete all data recorded on it.
• The disc may be dirty. Remove the disc and wipe off 
fingerprints, dust, etc.
• See *3 and *4 on p.96.
71
Disc error has 
occurred. Stop 
dubbing. Turn off 
power, then turn on 
again.
• Disc error occurred during finalizing, and finalizing 
failed. Replace the disc.
• See *3 on p.96.
77
Disc error has 
occurred. Format the 
disc now?
• Was the disc formatted on a PC, or formatting 
interrupted? Choose “YES” to format the disc. 
Formatting the disc will erase all data on it.
• See *3 on p.95.
71
Disc error has 
occurred. Keep Disc 
inside & restart.
Disc error could have occurred during editing of scenes. 
Turn off the camcorder with the disc inserted, and then 
turn it on again. The camcorder will attempt to restore 
scenes.
Disc error has 
occurred. 
Unfinalizing is not 
complete.
This message will appear when a disc error occurs during 
the unfinalization process. Replace the disc.
78
Disc must be 
finalized before it 
can be played on 
another device.
• This message will appear if you remove a BD-R/DVD-
RW (VF mode)/DVD-R disc that has not been 
finalized.
• See *5 on p.96.
77
Drive overheat. 
Please retry later.
In this case, proper writing/reading HDD/disc may not be 
possible. Turn off the power, then wait for a while.
Error occurred. 
Please replace disc 
or format disc.
• Error occurred while recovering the DVD. 
• Format the DVD. Formatting the DVD will delete all 
data recorded on it. If this error message persists, use 
another DVD. Note that DVD-R cannot be formatted. 
Use another disc. 
• See *2 on p.95.
71
Failed to recover 
video data. 
Corrupted scenes 
have been deleted 
and disc is usable 
again.
Error occurred while recovering BD. Although the 
recovery was unsuccessful, you can continue using BD.
Message
Cause & Troubleshooting
Reference 
page