Honeywell VRX180 Manuale Utente
Installation
Video Recorder - User Manual
25
Figure 2-5 DO Board Terminal Block Connections
The Digital Output board with relay outputs contain jumpers to set the de-energized state of the relay
contacts. The relays are factory set to Normally Closed (NC) for each output on the relay output board,
contacts. The relays are factory set to Normally Closed (NC) for each output on the relay output board,
To change the state of the contacts: See
Figure 2-6 DO Board Relay Contact Setting
. Use a pair
of needle-nose pliers and move the jumper from the location NC (normally closed ) to the location NO
(normally open).
(normally open).