Lg Electronics STB-2000 Manuale Utente

206-4256

1.   Read these instructions.
2.   Keep these instructions.
3.   Heed all warnings.
4.   Follow all instructions.
5.  Do not use this apparatus near water.
6.  Clean only with dry cloth.
7.  Do not block any ventilation openings. Install in accor-

dance with the manufacturer’s instructions.

8. Do not install near any heat sources, such as radiators,

heat registers, stoves, or other apparatus (including

amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades

with one wider than the other. A grounding-type plug

has two blades and a third grounding prong. The wide

blade or the third prong are provided for your safety. If

the provided plug does not fit into your outlet, consult

an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched,

particularly at plugs, convenience receptacles, and the

point where it exits from the apparatus.

11. Only use attachments/accessories specified by the

manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table

specified by the manufacturer or sold with the apparatus.

When a cart is used, use caution when moving the cart/

apparatus combination in order to avoid injury from

tip-over.

13. Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or

plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has been

exposed to rain or moisture, does not operate normally,

or has been dropped.

14. Never touch this apparatus or antenna during a thunder or

lightning storm.

15. When mounting an STB on the wall, make sure not to install

the STB by the hanging power and signal cables on the back

of the STB.

16. Do not allow an impact shock or any objects to fall into the

product.

17. Power Cord

Caution: It is recommended that appliances be placed

upon a dedicated circuit; that is, a single outlet circuit

which powers only that appliance and has no additional

outlets or branch circuits. Check the STB specifications.

Periodically examine the cord of your appliance, and if its

appearance indicates damage or deterioration, unplug it,

discontinue use of the appliance, and have the cord replaced

with an exact replacement part by an authorized servicer.

Protect the power cord from physical or mechanical abuse,

such as twisting, kinking, or pinching or being closed in a

door or walked upon. Pay particular attention to plugs, wall

outlets, and the point where the cord exits the appliance.

Do not use a damaged or loose power cord. Be sure to grasp

the plug when unplugging the power cord. Do not pull on the

power cord to unplug the STB.

18. Overloading

Do not connect too many appliances to the same AC power

outlet as this could result in fire or electric shock. Do not

overload wall outlets. Overloaded wall outlets, loose or

damaged wall outlets, extension cords, frayed power cords,

or damaged or cracked wire insulation are dangerous. Any of

these conditions could result in fire or electric shock.

19. Outdoor Use/Wet Location

Warning: To reduce the risk of fire or electrical

shock, do not expose this product to rain,

moisture or other liquids.

Do not touch the STB with wet hands. Do not install this

product near flammable objects such as gasoline or candles or

expose the STB to direct air conditioning.

Do not expose to dripping or splashing and do not place

objects filled with liquids, such as vases, cups, etc., on or over

the apparatus (e.g., on shelves above the unit).

20. Grounding

Ensure that you connect the earth ground wire to prevent

possible electric shock (i.e., an STB with a three-prong

grounded AC plug must be connected to a three-prong

grounded AC outlet). If grounding methods are not possible,

have a qualified electrician install a separate circuit breaker.

Do not try to ground the unit by connecting it to telephone

wires, lightning rods, or gas pipes.

21. Disconnect Device

The mains plug is the disconnecting device. The plug must

remain readily operable.

As long as this unit is connected to the AC wall outlet, it is not

disconnected from the AC power source even if you turn off

this unit by SWITCH.

(Continued on next page)

IMPORTANT SAFETY INSTRUCTIONS

PORTABLE CART WARNING