Olympus DS-2000 Manuale Utente

Ejecting SmartMedia cards

Set the POWER/LOCK switch to OFF.

The display disappears.

Raise the SmartMedia ejection switch.

Pull the SmartMedia card out with your fingers.

·····································································

The SmartMedia ejection switch won’t work
if the POWER/LOCK switch is set to ON.

Attention

• SmartMedia cards are precision devices. Never

force the cards when inserting them, or subject
them to sharp blows.

• Avoid handling and storing SmartMedia cards

in a hot, damp environment.

• Do not touch the contact area (gold electrodes)

of the SmartMedia card with bare hands.
If a SmartMedia card gets dirty, wipe it with a soft,
dry cloth.

• SmartMedia cards may be vulnerable to

electrostatic data corruption. When carrying a
SmartMedia card, put it in its case.
Remember to back up data from SmartMedia cards
to a PC or other storage medium from time to time
(

→

P.35).

• Corrupted, lost, or erased data cannot be

restored.

POWER

/LOCK

OFF

Inserting and Ejecting SmartMedia cards

SmartMedia inserted fully into the
slot

When you set the POWER/LOCK switch to
the ON position, “PLEASE WAIT” flashes on
the display.

SmartMedia not inserted fully into
the slot

When you set the POWER/LOCK switch to
the ON position, “INSERT CARD” flashes on
the display for 2 seconds. Pressing any button
with no SmartMedia card inserted causes
“INSERT CARD” to appear again.
Push the SmartMedia card fully into position.

Bottom side
of SmartMedia
projecting from
the slot