Panasonic TU-HDT105A Manuale Utente

TU-HDT105A

 

 

You have selected HD(RGB) format

at the rear panel switch. 

Press OK to continue.

 

The switch on the rear of the digital receiver 
must be in position B, and the AV 
connections must be taken from the RGB 
HD15 socket.  The digital receiver display 
will show “Hd r”.  Press 

OK

 to confirm the 

selection, or switch to another mode.  
Proceed to INSTALLATION. 

The switch on the rear of the digital receiver 
must be in position C, and the AV 
connections must be taken from the CVBS 
TV RCA socket.  The digital receiver display 
will show “Sdtv”.  Press 

OK

 to confirm the 

selection, or switch to another mode.  
Proceed to INSTALLATION. 

You have selected SD(TV/CVBS)

format at the rear panel switch. 

Press OK to continue.

 

 
 Installation 
 
 

The on-screen display will ask which type of display 
device is being used.  You will have a choice of 
either Plasma, LCD (Flat panel displays) or CRT 
(eg Standard television). 

 
 

Select from the choices using the remote control 
keypad.  The following screen will ask you to 
confirm 576i / 576p (depending upon the current 
mode).  Follow the on-screen instructions to test HD576p, HD1152i, HD1080i and 
HD720p formats. 

Please select the display type:

1 Plasma Display 

2 LCD TV            

3 CRT TV            

 

 
 

Note: Not all video formats are available in all modes.  The following table describes 
the available formats in each mode. 

 
 
 

 

 
 

 
 
 
 
 

 

HD (YPbPr) 

HD (RGB) 

SD (CVBS) 

 LCD/Plasma 

CRT 

LCD/Plasma

CRT LCD/Plasma CRT 

576i 

X X      X X 

576p 

X X X X     

1080i 

X X X X     

1152i 

 X  X    

720p 

X  X      

 

Table 1: Output format table 

10