Motorola DCH3416 Manuale Utente

Pagina di 48
  
7 CONNECTING YOUR DCH RECEIVER 
22
 
Connecting HDTV — Video  
Cable In 
Connect an RF coaxial cable to the cable wall outlet and the 
CABLE IN
 connector on 
the DCH receiver. 
Component Video (YPbPr) 
Connect the component video cables to the YPb, and Pr connectors on your HDTV 
and DCH receiver. 
This connection supports only the high-definition video connection between the 
DCH receiver and the HDTV. To connect the audio connections for your HDTV, 
proceed to the following page. To connect your audio connections for an A/V 
receiver, go to
Note: Be sure to match up each signal to the same connection on the TV, otherwise 
the colors will not appear correctly on your TV.
 
HDMI 
If your TV has an HDMI input, this is for both audio and video if you are using the TV 
speakers. Connect an HDMI cable to the TV and to the HDMI connector on your 
DCH receiver. 
If your TV has a DVI input, use the DVI connection for your video:  
•  Connect a DVI-to-HDMI adapter or cable to the HDMI out connector on the DCH 
receiver and the 
DVI-HDTV
 connector on your TV. 
A DVI connection supports only the video connection between the DCH receiver and 
the HDTV. To connect the audio connections for your HDTV, proceed to the following 
page. To connect your audio connections for an A/V receiver, go to 
If you have an audio/video receiver and are not using your TV’s speakers, go to 
DVI does not provide audio. A separate audio connection must be made. 
IEEE-1394 
If your HDTV has an IEEE-1394 connector, you can use the IEEE-1394 for both your 
video and audio connection:  
•  Connect an IEEE-1394 cable to the IEEE-1394 connector on your HDTV and DCH 
receiver. 
On-screen graphics will not be displayed when you are using the IEEE-1394 
connection on the rear panel of the DCH receiver. 
If you have an audio/video receiver and are not using your TV’s speakers, go to