Pioneer DVR-A03 Manuale Utente
DVR-A03/ DVR-103 Operating Instructions
- 7 -
9) Audio Output
connector for analog audio output, uses a Modex 70553 connector
Select the appropriate cable from the following chart:
Select the appropriate cable from the following chart:
Pin
Name
Function
1
L
Left channel audio output
2
G
Ground
3
G
Ground
4
R
Right channel audio output
10) Device Configuration Jumper
turn OFF the unit then set this jumper switch to select the drive use mode supporting
the computer (
the computer (
jumpered
= ON;
no jumper
= OFF)
Pin
Name
Function
1
MA*
on
Drive set to Master mode
2
SL
on
Drive set to Slave mode
3
CS
on
Drive set to Cable Select mode
4
Reserved
5
Reserved
* Pin #1 is active upon initial shipment.
11) Host IDE Interface
40-pin I/O connector in accordance with ATA specifications
12) DC Input
power supply input for DC +5 V and +12 V
Pin
Name
Function
1
+12
Power supply input for DC +12 V
2
G
Ground
3
G
Ground
4
+5
Power supply input for DC +5 V
4.3
Region Code Information
The maximum number of times the Region Code may be changed is five (5),
including the initial setting. The fifth change becomes PERMANENT.
including the initial setting. The fifth change becomes PERMANENT.
Note: Region Codes are part of the DVD Standard, however, Region Codes on DVD
discs are optional. DVD discs with no specified Region Code may be played on any
player.
discs are optional. DVD discs with no specified Region Code may be played on any
player.