Sanyo DVR-H200UK Manuale Utente

Note:

You can also use the numbered buttons to select a channel.

5. Press [

REC ] to start recording.

When recording is completed it may take a few
moments for the session to close.

Recording continues until you stop the recording or when the
disc or the HDD is full.

To stop recording

When you press [

STOP] , it may take a few moments for

recording to stop and the session to close.

To pause recording

Press [

PAUSE/STEP] to pause recording, and press [

PAUSE/STEP] again to resume recording.

To change the recording mode before recording:

Press [SETUP] button.

To change the TV Audio setting before recording:

Press [SETUP] button.

Note:

The new setting can't change the current recording mode but
will be activated during the next recording session.

To check the disc status while recording

Press [DISPLAY] , the recording information appears.

Before recording

1. This DVD recorder records on DVD+R/+RW,CD-R/RW

discs and the built-in HDD. Please use recommended
recordable discs to ensure the best recording quality.

2. DVD+R and CD-R are write-once discs.

3. DVD+RW and CD-RW are a re-writable discs.

4. You cannot add new recording sessions to DVD+R discs

after the discs are finalized.

5. In some cases, you may not be able to add new recording

(s) to a recordable DVD disc that contains contents written
on other DVD recorders.

6. A disc records 49 video titles maximum. A title recorded

on a DVD disc contains 99 chapter marks maximum. And a
disc contains 254 chapter marks totally maximum.

7. A title recorded on the built-in HDD contains 999 chapter

marks maximum.

ECORDING

Cautions:

Recording television programs

1. Press [ STANDBY/ON] to turn the unit on.

2. Press [HDD/DVD] to set the target device as “HDD”

or “DVD.”

If “DVD” is selected as the target device, press [

OPEN/

CLOSE] to open the disc tray and insert a recordable disc.
Press the button again to close the tray.
When you insert a new recordable DVD disc, the DVD recorder
automatically starts the disc preparation process.
When you insert a new recordable CD-R or CD-RW disc, press
[

] [] [] [] to select the disc format the disc is to be

prepared as.

3.Press [REC MODE] continuously to select the

desired recording quality.

SPLPEPSLP

Press [SOURCE] and press [

] [] to select “TV”

as the signal-input source.

4. Press [ CH + or - ] or press [

] [] to select the

TV channel you want to record.