Toshiba D-R17DTKB Manuale Utente
38
EN
One-Touch Timer Recording
(OTR)
This is a simple way to set the recording time in
blocks of 30 minutes. Check that the disc you are
recording onto has enough space remaining for the
time you set.
blocks of 30 minutes. Check that the disc you are
recording onto has enough space remaining for the
time you set.
1
Turn on the unit and insert a
recordable disc.
recordable disc.
Make sure that the TV input is set on the unit.
2
Select the recording mode using
[REC MODE].
[REC MODE].
(See page 32.)
3
Select the desired channel to record
using [PROG.
using [PROG.
/
] or
[the Number buttons].
4
Press [REC
I
] repeatedly until the
desired recording time (30 minutes
to 8 hours) appears on the TV
screen.
to 8 hours) appears on the TV
screen.
One-touch Timer Recording will start.
• When the unit reaches the specified time, it will
be turned off automatically.
• To change the recording length during One-
touch Timer Recording, press [REC
I
]
repeatedly until the desired length appears.
• To cancel One-touch Timer Recording within the
specified time, press [STOP
S].
Hint
• The remaining recording time will appear on the TV
screen during One-touch Timer Recording. Press
[DISPLAY] to see it on the TV screen.
[DISPLAY] to see it on the TV screen.
• The remaining recording time will be displayed on
the front panel display during One-touch Timer
Recording.
Recording.
• Unlike the timer recording, you can perform the
following operations during One-touch Timer
Recording.
- Turn off the power. (One-touch timer recording will
Recording.
- Turn off the power. (One-touch timer recording will
be cancelled.)
- Use [REC
I
] or [STOP
S] on the remote control.
Note
• You cannot use the pause function during One-
touch Timer Recording.
• The unit will be turned off automatically under the
following conditions.
- No space remains on the disc.
- If a power failure occurs.
- No space remains on the disc.
- If a power failure occurs.
• When One-touch Timer Recording is finished and
the power is turned off, the unit will switch to the
timer-standby mode automatically if a timer
recording has been programmed. Press
[
timer-standby mode automatically if a timer
recording has been programmed. Press
[
ON / STANDBY] to cancel the timer-standby
mode to use the unit continuously.
• If you want to monitor the programme that you are
recording, make sure the device such as a Satellite
Box is powered off or press [DISPLAY] when it is
connected to AV2.
Box is powered off or press [DISPLAY] when it is
connected to AV2.
DVD-RW
DVD-RW
Video
DVD-RW
DVD-RW
VR
DVD-R
DVD-R
D
DVD+R
VD+RW
W
DVD+RW
D
DVD+R
VD+R
DVD+R
0:30
8:00
7:30
1:00
Normal
Recording
E7J70BD_EN.book Page 38 Monday, May 7, 2007 3:31 PM