Toshiba DVR620KC Manuale Utente
43
EN
EN
Disc
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
VCR Function
Others
SATELLITE LINK
You can set the unit to start recording whenever it
detects the video signal from the external tuner.
detects the video signal from the external tuner.
Preparing for the satellite link timer recording:
Preparation on the tuner
• The external tuner should be equipped with some kind
Preparation on the tuner
• The external tuner should be equipped with some kind
of timer function. Using timer function of the tuner, set
it to output audio/video signals when it comes to the
time you want to start recording, and stop output audio/
video signals when it comes to the time you want to
finish recording. Refer to the tuner’s manual on how to
set the timer.
it to output audio/video signals when it comes to the
time you want to start recording, and stop output audio/
video signals when it comes to the time you want to
finish recording. Refer to the tuner’s manual on how to
set the timer.
• Make sure to set the satellite link standby mode when
you finish setting.
Preparation on this unit
• You must let the unit know which video input jack you
• You must let the unit know which video input jack you
are using before making a recording.
Refer to “SETTINGS FOR THE VIDEO INPUT” on page 27.
Refer to “SETTINGS FOR THE VIDEO INPUT” on page 27.
1
Select whichever the component
(DVD / VCR) you want to make a
recording to. (Refer to page 14)
recording to. (Refer to page 14)
2
Select the desired recording mode.
(Refer to “Recording Mode” on page 34
for DVD or “Recording” on page 93 for
VCR)
for DVD or “Recording” on page 93 for
VCR)
3
Press [SAT. LINK].
In a second, the unit will be turned into the
standby mode automatically as it goes into the
satellite link standby mode.
standby mode automatically as it goes into the
satellite link standby mode.
To cancel the satellite link function while in
the satellite link standby mode:
Press [SAT. LINK] or [TIMER SET].
To cancel the satellite link function while the
satellite link recording is in progress:
Press [STOP
the satellite link standby mode:
Press [SAT. LINK] or [TIMER SET].
To cancel the satellite link function while the
satellite link recording is in progress:
Press [STOP
C].
Note
• If the signal of external input breaks up over 5 seconds, satellite link function will be canceled.
• You cannot set the start or the end time for the satellite link timer recording on this unit.
• Recording picture will be distorted if the copy protection signal is being detected during satellite link timer
• You cannot set the start or the end time for the satellite link timer recording on this unit.
• Recording picture will be distorted if the copy protection signal is being detected during satellite link timer
recording.
• You can record the satellite link by using S-video input jacks on the rear panel. Refer to page 44 for more
information.
• When a regular timer recording and the satellite link timer recording are overlapped, those recordings are
recorded as illustrated below.
The first 2 minutes (at the longest) will be cut off.
example 2
timer
recording
recording
actual
recording
recording
satellite link
timer
recording
recording
actual
recording
recording
satellite link
The first 2 minutes (at the longest) will be cut off.
h
example 3
timer
recording
recording
actual
recording
recording
satellite link
example 1
E9PKCCD_DVR620KC_EN_book.indb 43
E9PKCCD_DVR620KC_EN_book.indb 43
2011/09/01 9:29:17
2011/09/01 9:29:17