CycleOps 200 PRO Manuale Utente

7

1. Adjust handlebar to maximize comfort 
or duplicate outdoor riding position.   
Stop the fl ywheel and dismount the in-
door cycle before making adjustments.

3. Turn small L handle counterclockwise 
to loosen.  Move the handlebar forward 
or back to achieve proper handlebar 
position. Turn small L handle clockwise to 
tighten. 

2. Turn large L handle counterclockwise 
to loosen. Raise or lower the handlebar 
post to the desired height. Turn large L 
handle clockwise to tighten.  

Adjust handlebar

N

M

Small L handle

Large L handle

Control Resistance (100 pro, 200 pro, 300 pro only)

The CycleOps Pro Series indoor cycle allows the user full control over resistance by adjusting the resistance knob. Lower resistance 
levels enable the pedals to turn at a faster (less diffi cult) pace/cadence.  Higher resistance levels enable the pedals to turn at a 
slower (more diffi cult) pace/cadence.

Adjust  Resistance (400 pro only)

Pedaling resistance is automatically controlled by the Joule display, located on the handlebar. Reference the Joule user guide for 
more information.

3. In case of emergency or before 
dismounting the indoor cycle, press 
directly down on the resistance knob 
to bring the fl ywheel to an abrupt 
stop.

1. Control pedaling resistance by using 
the resistance knob located behind 
the handlebar on the top tube of the 
main frame assembly.

2. Turn the knob clockwise (+) to 
increase resistance. Turn the knob 
counterclockwise (-) to decrease 
resistance.