Philips DTR 100 Manuale Utente

Pagina di 20
14
U
SING
 
THE
 S
ET
 T
OP
 B
OX
En
glis
h
 4
Use 
 to highlight 
Set Lock Key
 5
Press . 
A second sub-window is displayed, above right. 
 6
Enter the Lock Key code in the code entry box using the 
number buttons (0-9). 
Input now switches to the Confirm code entry box. 
 7
Enter the same Lock Key code in this window using the 
number buttons (0-9). 
The second sub-window displays Key Lock Changed and 
then closes. 
 8
Press 
Exit
 to Apply Setting and return to the Configura-
tion menu. 
Language 
To check what is available: 
 1
Press the 
Setup
 button to display the Main menu. 
 2
Use 
 to select 
Language
 3
Press .
 4
If alternatives are available use 
 to select the desired 
language. 
 5
Press 
 to apply these settings and exit this function. 
This change is only temporarily for the current program.
Timers 
You can use the Timer function to turn your Set Top Box 
on and off in Stand-by and also to automatically switch 
channels when your Set Top Box is on. 
Press the 
Menu
 button to display the Main menu. 
 1
Use  
to 
select 
Timers
 2
Press .
The following typical 
Timer Menu
 is displayed.
Note: To record on a VCR / DVDR you must also set the timer 
of the VCR / DVDR to record the desired program in the nor-
mal way. Make sure the timer program of the VCR / DVDR is 
set to the correct EXT socket for the set top box. 
To play back a recording from the VCR / DVDR, please make 
sure the Set Top Box is in standby.
Use 
 to select one of the five timer settings available. 
 3
Press . 
The following typical Timer Menu is displayed which 
shows Name box channel highlighted for selection. 
 4
Use 
 to step through the list of loaded channels until 
the channel to be set for timed turn on/off is displayed. 
 5
Use 
 to step to the 
Start
 time.