Samsung SIR-S4040R Manuale Utente

Pagina di 175
133
8
Q u e s t i o n s   A b o u t   t h e   D V R ’ s   P h o n e   C a l l s
• If you have call waiting, go to “Messages & Setup,” then “Recorder & Phone Setup,” 
then “Phone Connection,” then “Change Dialing Options.” Disable call waiting by 
entering the correct prefix in Call Waiting Prefix (usually *70,).
• If you dial a prefix for outside lines, go to “Messages & Setup,” then “Recorder & 
Phone Setup,” then “Phone Connection,” then “Change Dialing Options.” Set a Dial 
Prefix—for example, “9,” (nine, followed by a comma for a pause).
• Your phone line may have low voltage. Try setting Phone avail. detection to Off under 
Dialing Options, described on page 101.
• If you have a caller ID box, try removing it from the line since some models interfere 
with the DVR modem's ability to make a call. 
• If your DVR is having difficulty dialing out, try the following: Press LEFT arrow until 
you return to the Phone Dialing Options screen. Select Set Dial Prefix, and enter the 
dialing prefix “,#034” (comma, pound, zero, three, four). Use the PAUSE button to 
enter a comma, and the ENTER button to enter a pound. This command sets the 
DVR’s modem to a slower speed, which helps phone calls succeed in some 
environments. The DVR does not dial the prefix as part of the number.
• If you have a cordless telephone, fax machine, or computer modem connected to the 
same line, go to “Messages & Setup,” then “Recorder & Phone Setup,” then “Phone 
Connection,” then “Change Dialing Options.” Turn off  “Phone avail. detection.”
• You might have too much line noise to make a connection. The DVR ships with a 25 
foot phone cord. Try a shorter cord, or buy a line noise filter at your local electronics 
store. 
Users_Guide_DTV3.1.book  Page 133  Wednesday, June 4, 2003  7:08 PM