Samsung DS 5000 Manuale Utente

4. Press TRSF to store and exit 

programming OR press SPK to store 
and advance to the next program

NOTE: Directory information is always 11 characters.

Names are written using the keypad. Each press of a key will select a character.
Pressing the dial pad key moves the cursor to the next position. For example, if the
directory name is “SAM SMITH,” press the number “7” three times to get the letter
“S.” Press the number “2” once to get the letter “A.” Continue selecting characters
from the table below to complete your message. Press the “A” key to change the
letter from upper case to lower case.

NOTE: When the character you want appears on the same dial pad key as does the
previous character, press the UP key to move the cursor to the right.

,

,

The # key can be used for the following special characters: #, space, &, !, :, ?, ., %, $, -
, /, =, [, ], @, ^, (, ), _, +, {, }, |, ;, \,“ and ~.

14

13

2. Dial the station number OR use the

UP and DOWN keys to scroll through

,,,,

the keyset numbers and press the 
right soft key to move the cursor right

3. Press HOLD to reset the passcode

4. Press the right soft key to return to 

step 2 OR press TRSF to store and exit 
programming OR press SPK to 
store and advance to the next program

This program is used to assign a character name or identification for each exten-
sion. You may assign a name of 11 characters long.

UP & DOWN - Used to scroll and move cursor.
KEYPAD - Used to enter characters.
HOLD - Press to clear entry.

Open customer programming and follow the instructions below.

1. Press TRSF and then dial 104

Display shows

2. Dial station number (e.g., 205)

OR press UP or DOWN to select the 
station and press the right soft key to 
move the cursor

3. Enter the station name using the 

procedure described on the next page

and press the right soft key to return to
step 2