Panasonic kktva200 Manuale Utente
Subscriber’s Manual
94
7.4
Customizing the
Message Manager's
Mailbox
Message Manager's
Mailbox
The Message Manager is able to
customize the Message Manager's
mailbox by specifying: (1) the password;
(2) the extension numbers of Operator 1,
2, and 3; or (3) Telephone numbers 1 and
2 as the call forwarding destinations when
Remote Call Forwarding is set to an
outside line.
customize the Message Manager's
mailbox by specifying: (1) the password;
(2) the extension numbers of Operator 1,
2, and 3; or (3) Telephone numbers 1 and
2 as the call forwarding destinations when
Remote Call Forwarding is set to an
outside line.
Note
•
If the VPS is being programmed via
KX-TVA Maintenance Console, the
Message Manager cannot customize
his or her mailbox. The VPS will
announce, "Sorry, this function is not
available".
KX-TVA Maintenance Console, the
Message Manager cannot customize
his or her mailbox. The VPS will
announce, "Sorry, this function is not
available".
Message Manager's Password
The Message Manager can change the
password at any time using the
telephone. The password contains a
maximum of 10 numeric characters. It
must be entered to execute the message
management operation.
password at any time using the
telephone. The password contains a
maximum of 10 numeric characters. It
must be entered to execute the message
management operation.
Operator's Extensions
When callers require help, they can dial
[0] to be transferred to an operator. A
maximum of 3 operators can be
programmed for each time mode; these
operators are not necessarily the same
as the operator extensions programmed
for the PBX. The extension assigned as
Operator 1 for the day mode is
designated as the Message Manager.
[0] to be transferred to an operator. A
maximum of 3 operators can be
programmed for each time mode; these
operators are not necessarily the same
as the operator extensions programmed
for the PBX. The extension assigned as
Operator 1 for the day mode is
designated as the Message Manager.
Telephone Numbers 1 and 2 for
Remote Call Forward to Outside
Remote Call Forward to Outside
After programming/changing the
telephone numbers used for Remote Call
Forward to Outside, the Message
Manager must reset the remote call
forwarding setting (see 7.7 Remote Call
Forwarding Set), even if it was already
enabled. Telephone numbers set here will
not be effective until remote call
forwarding is reset. If you do not reset
remote call forwarding, calls will be
forwarded to the old telephone numbers.
telephone numbers used for Remote Call
Forward to Outside, the Message
Manager must reset the remote call
forwarding setting (see 7.7 Remote Call
Forwarding Set), even if it was already
enabled. Telephone numbers set here will
not be effective until remote call
forwarding is reset. If you do not reset
remote call forwarding, calls will be
forwarded to the old telephone numbers.
1.
Log in to the Main Menu.
•
2.
3.
to change the password.
to accept.
4.
Enter the password, then
.
5.
to accept.
6.
to change or assign the
operator's extension.
to accept.
to delete, then continue from
step 9.
•
Operator 1's extension number
cannot be deleted.
cannot be deleted.
7.
Enter the extension number.
8.
to accept.
9.
Repeat steps 6-8 to assign or to
delete the extension number for
the Day, Night, Lunch and Break
Modes for each operator.
delete the extension number for
the Day, Night, Lunch and Break
Modes for each operator.
10.
to change or assign the
telephone number 1 setting.
3
1
2
#
2
1
2
3
2
1