Patton electronic 4940 Manuale Utente

Bootloader

SmartNode 4940 Getting Started Guide 

After the SmartNode has been rebooted the new startup configuration will be activated.

 

172.16.1.99(if-ip)[WAN]#reload

 

Running configuration has been changed.

 

Do you want to copy the 'running-config' to the 'startup-config'?

 

Press 'yes' to store, 'no' to drop changes : no

 

Press 'yes' to restart, 'no' to cancel : yes

 

The system is going down

The bootloader ensures that basic operations, network access, and downloads are possible in case of interrupted 
or corrupted application image downloads. It offers console access to the Bootloader and the capability for 
downloading application images (e.g. SmartWare) via the serial link of the console.

To start the Bootloader, power on the SmartNode while pressing the reset button.  Open a Telnet session to 
the SmartNode via one of the Ethernet interfaces, or open a CLI session via the console port (if available on the 
SmartNode).  The login display will appear.  Using the credentials admin / patton , log in to the SmartNode. 
The following prompt will be displayed:

RedBoot>

Type help to display an overview of the available commands. 

When you issue the reload command, the SmartNode will ask 
if you want to copy the running configuration to the startup con-
figuration. Since you just downloaded a configuration file to the 
startup configuration you must answer this question with NO. 
Otherwise, the downloaded configuration will be overwritten 
and lost!

IMPORTANT