Avaya 15-601076 Manuale Utente

1.

Press 

 Admin or 

 Admin 1. See 

Display Key Programming

.  

2.

To switch to longhand programming mode, press Expl? 

3.

Press Next 

 until the required function required is shown, then press Selct 

.

4.

If the function requires some data to be entered, [ ] is shown at the bottom of the display. Enter the data using the
normal telephone keypad.

5.

The upper part of the display reverts to showing the functions currently assigned to each 

 and 

.

6.

To move between the pages of display keys, press 

 and 

.

7.

To select the display key against which to program the new function, press 

 or 

.

Caution
Do not select the slot used for the Admin function. Replacing this function will lock the phone for further
programming until reset through the telephone system.

8.

If the display slot is not already used, the display shows BUTTON PROGRAMMED!.

·

To end programming, press 

 EXIT.

·

To continue programming other functions, press 

 Cont.

9.

If the display slot already has a programmed function, the display shows FEATURE ON BUTTON. Press 

 or 

until Repla, Keep and Delet are shown along the right-hand edge of the display.

·

Press Repla 

 to replace that existing function with the one just programmed. BUTTON PROGRAMMED! is

displayed.

·

To keep the existing function and forget the function just programmed, press Keep 

.

·

To delete the existing function and forget the function just programmed, press Delete 

.

 

49