Avaya 7940 Manuale Utente

Additional Configuration Notes (Upgrading from very old
Cisco firmware releases) - Incremental Upgrade Steps

Create the ringlist.dat file as detailed in the following slide titled, “

Creation of

ringlist.dat (stored in the /tftpboot directory)

” and copy it into the /tftpboot

directory of your TFTP server. Note: The ringlist.dat file is optional.

–

You will also want to copy the referenced .pcm files into /tftpboot

10.

Verify DHCP server is enabled and that DHCP option#66 is provisioned with

the IP Address of the TFTP server hosting the above files.

11.

Enable the TFTP Server application

12.

Power-up the Cisco 7960 SIP phone and proceed with the upgrade process

13.

If your were using static IP addressing, re-enter the IP parameters into the

phone one the upgrade process is complete since the upgrade to SIP 5.3 will

clear them. Note: The default password to “Unlock Config” is cisco. You must

first disable DHCP to be able to re-enter/save the static IP parameters. Power

cycle the phone.

14.

The Cisco 7960 SIP phone should register with the extension and password

provisioned in the SIP000943665383.cnf (SIPmacaddress.cnf) file.

15.

Edit the OS79XX.TXT and replace the current line (P0S3-05-3-00) with this

line

–

P003-07-4-00